TPU (Thermoplastic Polyurethane) is a flexible filament. Not quite as easy to print, but once you've found the right settings. It makes a lot of fun to use this material.
Perfect if you want to print flexible objects such as gaskets and bracelets.
Do not print directly on PEI. Since the adhesion is so strong that you are likely to break your print pad when you leave the print bed. Use a separator such as Glue stick.
- Print temperature 210 ° C +/- 10 ° C
- heated bed is recommended around 70 ° C.
- Print speed max. 30mm / s.
- No enclosure of the printer required.
- Turn off the retraction.