PETG / CPE
PETG (polyethylene terephthalate glycol-modified) is as easy to print as PLA material. Suitable for parts with medium mechanical stress. Due to the glass transition temperature of 80 ° C, it can also be used in areas with higher temperature (car).
Important !!!
Do not print directly on glass or PEI. Since the adhesion is so strong that it will damage your printing surface. Use a separator such as Glue stick.
- Print temperature 245 ° C +/- 10 ° C
- heated bed & is required.
- No enclosure of the printer required.
- The material is biodegradable.
x
No results found for this filter.