High quality kit of the popular Voron V0.1 3D Printer.
(3D printed parts are not included, and must be printed by yourself, or someone with a 3D Printer!!!)
Features & Extras:
Stainless Steel Linear Rails - That's right, no more worrying about rusty rails. You'll still want to grease these rails, but you can do it at the end of your build.
Linear Rail Mounting Bar - Our kit includes 5 custom 7H size linear rail mounting bar to secure the linear rails onto the extrusions, (no need to fiddle with tiny m2 nuts on a thin plastic part)
Brass Heatset Insert Tool - We've included a custom machined brass tip for your soldering iron, use it to install heatset inserts with ease! Check here for more information.
Pre-cut & Pre-wired - Our kit includes all necessary wiring: cut to just the right length and pre-crimped or soldered to their respective parts. See our supplementary wiring guide here.
Two Types of Nuts - We've included both black oxide hex nuts and stainless square nuts in our kit, use whichever type you prefer.
Partially Threaded Screws - The small pack of partially threaded SHCS screws (M3x30/x35) are for the mini-afterburner, they help reduce wear on the Guidler and Latch parts.
Hex Wrenches - We found that 1.5mm hex wrenches wear out easily, so we threw in a bunch of them. However, you should definitely still buy a set of good quality hex wrenches.
Threadlocker - A separate bag of set screws with precoated threadlocker is included.
2mm Drill Bit - Metric drill bits may not be very common in some parts of the world, so we included one. Use it to ream the filament path in your printed extruder parts.
Printed Parts Guide (LDO supplement) - Are you planning on printing parts before the kit arrives? Read our supplementary print guide to see which parts to print/replace/omit.
Wiring Guide - We created this supplementary wiring guide to make wiring your printer a breeze.
Nuts in 1515 Extrusions - See our short guide here for tips on handling nuts in 1515 aluminium extrusions.
Scope of delivery:
LDO V0.1 Motor Kit
LDO Rail Kit
Phaetus Dragonfly BMO (Please don't use the SCHC M2.5x6 in the hotend kit, and use the BHCS M2.5x6 from hardware kit for mounting)
Pre Made Wire Kit
Fans, heaters, buck converter, hardware, tools
2 Flex Build plates (one powder coated and one smooth PEI) and magnet
Cast aluminum bed
BigTreeTech SKR mini E3 (v2)
3D printed parts are not included, and must be printed by yourself, or someone with a 3D Printer!!!
There are no reviews yet.