Fiberlogy EASY PET-G

EASY PET-G combines the ease of printing with PLA and high strength comparable to that of the traditional PET-G. Printing with EASY PET-G is free from the deficiencies typical of printing with PET-G such as stringing or filament burning. EASY PET-G is available in opaque and transparent versions. Both forms offer a satisfying final effect in the form of an attractive looking top layer of the printouts.

Fiberlogy EASY PET-G will work great both for printing functional models and decorative elements.

Technical Data:

• Filament diameter: 1.75mm

• Print temperature: 230-250 °C

• Bed temperature: 75-85 °C

• Weight: 850g Filament

• Diameter tolerance: +/- 0.02mm

• Oval tolerance: +/- 0.01 mm

• Very easy to print

• Good bridging and overhanging behavior

• no enclosure necessary

Due to the strong adhesion to it, it is not recommended to print directly on the surface of the table or glass, as it may damage it.
We recommend using a separator (Magigoo, masking tape).

Technical data sheet

Safety data sheet