Energetic Magnetic Sheet for Spring Steel Sheet 310x310mm for Creality CR-10 CR10S - Single sided PEI Smooth

SKU: 11979
Manufacturers: Energetic Industry

25,49 €

incl. 19% VAT , plus

40 In stock
Delivery time: 2 - 3 Workdays (DE - int. shipments may differ)

Description
Reviews

Energetic Magnetic Sheet for Spring Steel Sheet 310x310mm for Creality CR-10 CR10S - Single sided PEI Smooth

With this flexible printing underlay, the days of spatulas and the like are finally over. Simply remove the plate from the printing bed,
bend it and the print is released.

The use of high-quality spring steel means that this printing pad is always perfectly flat and does not warp when heated.
Only high-quality PEI from European production is used for the plate. This ensures an even layer thickness and good adhesion.

Features:

No warpage
Better first layer
Flexible and removable
Suitable for a variety of filaments.
Easily remove the print - after cooling, just bend the sheet a little and take the print off
PEI is already applied with 3M adhesive tape.

Note on using the smooth PEI surface:

When printing PETG / PCTG / TPU / ASA please use a separator (e.g. Magigoo) because The adhesive force of these materials in connection with PEI causes the material to bond permanently to the pressure plate.

When removing the prints, please make sure that the plate has cooled down completely.
Otherwise you risk damaging the sheet.

Scope of delivery:

1x spring steel sheet 310x310mm with one-sided PEI smooth

Magnetic bed option:

If you do not have a magnetic print bed, there is also the option to buy a magnetic plate.

The big advantage of this magnetic disk is the high temperature resistance of 140 ° C.
Most cheap plates lose their magnetic properties at temperatures above 85 ° C. The plate is equipped with a 3M adhesive film on one side.