Powerful mainboard that supports up to 5 stepper drivers and with a fast 480MHz CPU .Thanks to the 32-bit ARM Cortex M7 processor, this board can perform more calculations than the standard 8-bit boards that are installed in most 3D printers.This allows you to also use more sophisticated software such as Marlin 2.0 and Klipper.It is the successor to the SKR 2 motherboard and adds many new and improved features, such as native support of PT1000 thermistor.
32-bit ARM Cortex-7 CPU with 450MHz
5 Stepper Driver Slots
Up to 6 stepper motors can be connected
WIFI interface connection (ESP-12S, ESP-07S, ESP32)
Native support for PT1000 Thermistor
Supports BigTreeTech TFT displays as well as LCD12684, LCD2004
BOOT0 easy access to DFU mode to flash firmware
High power MOSFET
enhanced protection circuit for thermistors
easy switch between USB and CAN mode
Same dimensions as the SKR2 board, making it easy to replace
Dimensions: 109.67x84.3mm
hole spacing: 101.85x76.3mm
Connectors:
12V/24V input voltage
5 Stepper Driver slots (SPI, UART, STEP/DIR)
6 stepper motors can be connected (dual Z axis)
1 Micro SD card reader
1 USB port
1 WIFI interface connection (ESP-12S, ESP-07S, ESP32)
2 connections for cartridge heaters
1 connection for heat bed
3 temperature sensor connections
3 connections for CNC fans
2 ports for regular fans
1 connection option for BL-Touch Sensor
3 connections for limit switches
1 filament runout connection option
There are no reviews yet.
Please see our Privacy Policy