BigTreeTech Octopus Pro V1 32-Bit 60V Mainboard

BigTreeTech Octopus Pro V1 32-Bit 60V Mainboard

SKU: 11921
Manufacturer number: ZZB000585
Manufacturers: BigTreeTech

Version

from

79,00 €

incl. 19% VAT ,

12 In stock

This item has variations. Please select the requested variation.

Description
Reviews

BigTreeTech Octopus Pro V1 32-Bit Mainboard

Powerful version of the popular Octopus V1.1 motherboard that supports up to 8 stepper drivers and can control motors with up to 60V.

Thanks to the 32-bit ARM Cortex M4 processor, this board can perform more calculations than the standard 8-bit boards that are installed in most 3D printers.
This means that you can also use more sophisticated software such as Marlin 2.0 and Klipper. Due to the 8 slots for stepper drivers, this board is particularly good for demanding machines such as e.g. ToolChanger, suitable for multi-color printers.
There are no limits to your fantasies.

This mainboard is available with 2 different processor versions.

STEM32F446ZET6 180MHZ with 512K flash memory (the RRF firmware only runs here in a stripped-down form)
STEM32F429ZGT6 168MHz with 1MB flash memory

Features:

32-bit ARM Cortex-M4 CPU with 180MHz / 168MHz
8 stepper driver slots
Up to 9 stepper motors can be connected.
HV Drive: MAX8
Rasperry PI Interface
WIFI Interface
Adjustable fan voltage (24V, 12V, 5V)
Auto power down enabled (separate relay required)
Power Loss Recover Feature (separate UPS module required)
Connection option for WS2812 LED
Replaceable fuses
Supports BigTreeTech TFT displays as well as LCD12684, LCD 2004
Stallguard for sensorless homing
On-Board 32K EEPROM
High performance MOSFET
Dimensions: 160x100mm
Hole spacing: 150x90mm

Connections:

Recommended mainboard input voltage 15V / 28V
Motor input voltage 12V / 60V
Heating bed input voltage 12V / 28V
8 stepper driver slots (SPI, UART, STEP / DIR)
9 stepper motors can be connected (dual Z axis)
Rasperry PI Interface
CAN BUS, SPI and I2C
USB-C
WIFI interface for ESP8266 module
Connection option for WS2812 LED
4 connections for cartridge heaters
5 temperature sensor connections
6 connections for PWM fans
2 connections for a permanent fan
1 connection for BL-Touch sensor
6 connections for limit switches
2 filament runout interfaces

More information, firmware and instructions are available here

Manufacturer information:

Shenzhen Big Tree Tech Technology Co., Ltd.
No 9 Zone East, Shangxue Keji yuan, Bantian Long Gang District
Guangdong
Shenzhen, China, 518129
service001@biqu3d.com
https://bigtree-tech.com

Responsible person:

JS-Commerce Gmbh & Co. KG
Hauptstr. 30
Bayern
Kleinrinderfeld, Deutschland, 97271
info@jacksfilament.com
https://www.JacksFilament.com