BigTreeTech Eddy Coil Bed Leveling Sensor
The Bigtreetech Eddy Sensor enables fast and highly precise leveling of the print bed. Thanks to its form factor, it is suitable for all Voron 2.4 printers.
Remarkably light - Weighing only 6 g, it places little strain on the extruder but offers highly precise leveling.
Precise - 0.5 µm accuracy which results in a more uniform first layer.
Lightning fast - In just 20 seconds. you can level your bed (with a bed size of 250x250mm).
Temperature compensation - The sophisticated technology makes leveling possible regardless of temperature fluctuations.
Compatible with Voron Steahlburner - The form factor makes it child's play to effortlessly replace the TL-Q5MC/PL-08N.
Technical data:
-
Weight: 6g
-
Voltage: 5V
-
Ampere: 3mA
-
Cable length: 150mm
-
Cabling: 4-2.54mm DuPont female, one end with ZH1 5mm 4P connector
-
Working temperature: up to 60°C
-
Accuracy: 0.5 µm
-
Firmware: Klipper
-
Z-Homing device required: Yes
-
MCU: None
-
Boards: Requires a connection to a Klipper-based motherboard (e.g. B. EBB36/42 CAN) with an I2C interface
-
Heated bed: Requires a conductive metal bed with a uniform magnetic field
More information and instructions can be found here
